Programming; Activation Period - PRG GT-ZSd-01 Manual De Operación

TAKING INTO OPERATION
TIP
While in timer mode, push on the S/W button for switching between the summertime and
wintertime. If summertime has been set, then a „sun" icon will be shown in the display.
77

PROGRAMMING

It is possible to save up to a total of 20 programming locations, each of which has been pro-
grammed with an ON and an OFF function. If you would like to review the locations you have
programmed, push the PRD (PROGRAM) button twice while you are in timer mode. Program
location „1 ON" will be displayed. The next location will be shown, namely „1 OFF", followed
by „2 ON", „2 OFF" and so on, each time that you push the PRG button again. If you keep
the PRG button depressed, then the program locations will be displayed in sequence, up to
the last program location „20 OFF". At the end of these 20 programs, the programm location
for the timer function will be called up.

Activation period

1. Push the PRG button until you reach the „Activatiopn period" setting. The program
location 1 is shown and the display shows PRG SET ON I.
2. Push the DAY/SEC button for setting the desired date.
78