Miscellaneous; Hand Held Probe (Optional) - Intelect COMBO LEGEND Serie Manual Del Usuario

OPERATION

Miscellaneous

To Change Presets
• Select and modify desired parameter(s).
• Press and hold the button, then press the
pause
To Change LCD Screen Contrast:
• Press and hold the
main menu
• Modify contrast by using the

HAND HELD PROBE (Optional)

HIGH VOLT Probe
The High Volt probe is used to deliver stimulation manually. Select the High Volt waveform then simply plug the Black lead wire into
the connector of the Probe. The Red lead wire from the same channel should be attached to an electrode and placed near the
treatment site. The default polarity for High Volt is positive. When using this setting, the Red lead is positive and the Black lead is
negative.
• Select the parameters you wish to change then press the start button to begin treatment.
NOTE: Place the ground electrode as close to the treatment site as possible where it will not interfere with placement of the active
electrode; for example, do not place the ground electrode on the leg if you are treating the arm.
button.
enter
button.
/
buttons.
power intensity
27
Intelect® Legend Series Combo