Cleaning And Maintenance; Institutional Use; Specifications; Vent Hole Pressure/Flow Characteristics - DeVilbiss Healthcare Innova 50166 Manual De Usuario

clEaNINg aND MaINTENaNcE - SINglE paTIENT uSE
Cleaning is recommended on a daily basis. Hand wash the mask and headgear in warm water using a mild detergent.
Rinse the mask thoroughly after washing. Visually verify that the vent holes are clear, and allow the mask to air dry.
Washing your face prior to fitting the mask will remove excess facial oils and help extend the life of the mask.
NOTE: Inspect mask prior to each use. Replace the mask if parts are damaged or gel is exposed due to tear or
punctures.
NOTE: The gel cushion, although silky to touch, will not tear, leak or detach from the mask under normal use and
following recommended cleaning and maintenance protocols. However, the gel cushion is not indestructible. It will tear, cut
and rip if subjected to mishandling or abuse. The warranty does not cover these types of product failures. Therefore,
please handle your new mask with care.
Weekly Cleaning (if desired): The Innova Mask is dishwasher safe if placed in top rack; small components should be
secured. Air dry before use.

INSTITuTIoNal uSE

UNITED STATES ONly: Contact the manufacturer for the recommended method of disinfection. When using CIDEX OPA
solution, use at full strength.

SpEcIFIcaTIoNS

Dimensions
Fully assembled mask (without headgear). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123mm (H), 80mm (W), 86mm (D)
Weight
Mask with headgear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85g
Headgear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18g
Materials Used (The mask system is free of PVC-, DEPH and Phthalate)
Mask frame. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Polycarbonate (PC)
Headgear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Nylon, Spandex
Cushion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Silicone-Gel
Resistance to air flow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . @ 50 l/min: 0.25 cmH
Resistance to air flow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . @ 100 l/min: 0.95 cmH
Dead space (approx) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Small size - 76 ml / Medium size - 102 ml / Large size - 108 ml
Operating Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Do not expose the mask to temperatures above 140˚F ( 60˚C)
VENT holE pRESSuRE/FloW chaRacTERISTIcS (appRoX.)
Vent Flow (l/min)
Mask Pressure (cm H O)
2
90147
®
O
2
O
2
5