KlipXtreme ZounDtastik KLS-670 Manual De Usuario página 3

Top panel
1
6
8
10
12
Control
1. GT/Mic IN These stereo ¼-inch jacks accept the input from a wired microphone or guitar
2. LED bar When the ligth switch is turned on, it cycles through a wide range of different
colors
This screen displays the selected input mode: Bluetooth
3. LED display
tuner, the volume level, the track being played, and the selected channel
Enables audio playback from MP3 and WMA music files stored in a USB
4. USB port
memory stick
5. SD card slot
TM Insert an SD TM
6. Guitar volume
Once a guitar is connected to the guitar input jack, the user can adjust the volume
level coming from the speaker
7. ECHO knob
Adjust this knob to control how much of an echo effect (EC00-E30) is applied to
the signal from the microphones or guitars actively connected to the speaker
8. Microphone Controls the audio level of the wireless and wired microphones actively connected
volume knob
to the speaker. When adjusting the microphone volume, CV appears on the screen
Controls the overall audio level from all inputs. The volume can also be controlled
9. Main volume knob
directly from each of the sources connected to the speaker
2
5
3
4
14 15 16 17
Description
® , USB, Aux, SD
card here to play MP3 and WMA music files
Control
10. Bass +/-
11. Treble +/-
12. REC button
7
9
13. Standby
11
14. Previou
13
15. Play/Pause
16. Next
17. Mode
Back panel
TM and
1. Light switch: Turns the LED lights on and off. Make sure to turn on the LED lights only after the unit is fully
powered.
2. Power switch: Turns the unit on and off.
3. AC input: Plug the supplied power cable in this jack.
4. Auxiliary input: Connect a CD player, digital media player or other audio source to these stereo line-in
connectors.
5. FM antenna: Picks up the signal for the tuner.
Increases or decreases the bass (low) frequencies of the speaker
Increases or decreases the treble (high) frequencies of the speaker
This button enables the recording function when using a wired or wireless
microphone. A USB or SD memory card are required to use this feature. The
TM
audio captured by the microphone, auxiliary, guitar and tuner inputs can be
recorded and saved in the memory selected.
To start recording, simply press this button once. Press it again to stop the
recording. During audio playback, briefly press this button to delete a recorded file.
DEL will come up on the screen to confirm this action
Press this button to switch the device from standby to active mode, and vice versa
In USB and SD™ mode, briefly press this button to select the previous song.
Press and hold for 3 seconds to fast backward tracks on your playlist
In tuner or Bluetooth® mode, briefly press this button to go to the previous
channel or song
This feature is not available in auxiliary mode
In USB, SD™ or Bluetooth® mode, briefly press this button to start and pause media.
In tuner mode, press and hold to initiate the automatic scanning of channels and
store them as presets in the memory
This feature is not available in auxiliary mode
In USB and SD™ mode, briefly press this button to select the next song. Press
and hold for 3 seconds to fast forward tracks on your playlist
In tuner or Bluetooth® mode, briefly press this button to go to the next channel
or song
This feature is not available in auxiliary mode
Press this button briefly to toggle through the different audio sources available:
Bluetooth , USB, SD , Line In and FM. As there is no default mode assigned, the
® TM
system starts playing automatically the last media source inserted
Model #: KLS-670
Loudspeaker System Bluetooth Compatible
®
Input Voltage (AC): 100-240V 50/60Hz
Lot#:
2 3
AC IN
ON/OFF ON/OFF
1
LIGHT SW POWER 100-240V 50/60Hz
Description
Caution
Do not open the cabinet to
avoid electric shock
4 5
L R
AUX IN
FM ANT