Johnson Health Tech Matrix C50 Manual Del Usuario página 7

• Open HARDWARE FOR STEP 5.
5
• Connect the CONTROL ZONE WIRES (14).
• Attach CONTROL ZONE (15) to BASE FRAME (5) using 2 BOLTS (K).
• Tighten bolts to 39 Nm / 28.8 lb-ft.
IMPORTANT: Do not install control zone until the ClimbMill is positioned
.
where it will be used
5
Hardware For Step 5
Description Qty
K Bolt 2
14 K
15
6
PLACE WARNING LABEL HERE
ASSEMBLY COMPLETE!
7