Alive Software; Technical Specifications - Paradox Security Systems MAGELLAN MG-PMD85 Manual Del Usuario

Alive Software

If the motion detector transmits two alarm signals
(LED on for 4 seconds) within a five minute
period, the detector will fall into Energy Save
mode where the detector will not transmit any
alarm signals for approximately 3 minutes. Due
to the motion detector's Alive software, the red
LED continues to flash to indicate a detection
even when in Energy Save mode. Once the
three-minute Energy Save mode ends, the
detector will return to normal operation.
If the detector's cover is removed and then
replaced while in Energy Save mode, the first
detection will trigger an alarm signal.

Technical Specifications

Sensor type:
Sensor geometry:
Coverage:
Installation height:
Operating temperature: -35°C to +50°C (-31°F to +122°F)
Animal immunity:
Power:
RF frequency:
Lens:
Transmitter range:
Tamper switch:
Detection speed:
†
Battery life :
Reference & Installation Manual
Dual Element Infrared (x 2)
Rectangular
11m x 11m (35ft x 35ft) 90°
viewing angle
2m to 2.7m (7ft to 9ft)
40kg (90lbs)
3 x "AA" alkaline batteries
433* or 868**MHz
2nd generation Fresnel lens,
LODIFF®, segments
35m (115ft) with MG-6060; 70m
(230ft) with MG-RCV3; typical in a
residential environment
Yes
0.2m/s - 3.5m/s (0.6ft/s - 11.5ft/s)
4 years
9n