SHOULD A PROBLEM ARISE
Type of issue
The unit does not work when turned on.
The humidifying capacity is too low.
The room temperature humidity level is too high.
Condensation in the room.
The unit is too noisy.
The appliance stops.
Aspects to be checked
The insufficient water level indicator light flashes
Position the unit (leaning). Position the water tank.
Connect the unit
Required water level not yet reached in the nebuli-
zation chamber (wait a few moments).
Close doors and windows.
Mist output rate too low.
Clear the air vents and nozzle.
Set the target humidity level.
Room temperature level too low.
Place your appliance on a stable, flat surface.
The programmed operating period has elapsed.
The water level indicator light flashes
Set the target humidity level.
10
EN