COFFEE SYSTEM OPERATION
Prior to Use
To ensure all residual oil from the manufacturing process
has been removed, clean the coffee system thoroughly
with hot water and a mild detergent prior to use. Rinse and
dry with a soft cloth. Refer to care recommendations on
page 16.
Remove, fill and reinstall water tank. Refer to the illustra-
1
tion below.
Using the handle, slide unit forward and open the whole
2
bean compartment lid. Refer to the illustration below. Fill
the compartment, then slide unit back into position.
Install water spout or milk container.
3
The unit will go through an automatic rinse cycle upon
4
initial start up and before turning off. A small amount of
liquid will dispense from the coffee spout during the rinse
cycle.
WATER TANK
Water tank.
WHOLE BEAN COMPARTMENT
Whole bean compartment.
Cup Placement
The adjustable height coffee spout has two outlets. One or
two cups can be placed under the spout. Adjust the height
of the spout as close to the cup(s) as possible. Refer to the
illustrations below.
COFFEE
SPOUT
Coffee spout.
Cup placement.
|
wolfappliance.com
9