Troubleshooting
Heating or cooling
system does not
respond
P/N 041-339 Rev. C
Press SYSTEM to set system to Heat. Make sure the temperature is set
•
higher than the Inside temperature.
Press SYSTEM to set system to Cool. Make sure the temperature is set lower
•
than the Inside temperature.
•
Check circuit breaker and reset if necessary.
•
Make sure power switch at heating & cooling system is ON.
•
Make sure furnace door is closed securely.
•
If "Wait" is displayed, the compressor protection timer is ON. Wait 5 minutes
for the system to restart safely, without damaging the compressor.
17
TouchPRO Wireless
69-2656EFS—05
®