Ec Declaration Of Conformity - Battipav MASTER LINDA 0905S Manual De Instrucciones

Battipav srl
ADJUSTING
17 23 Use an 8 mm Allen wrench and a 17 mm spanner to tighten the bolt at the base of the handle until any lateral play is
eliminated.
CHECK THE TIGHTNESS OF THE BOLTS, NUTS AND NUTS ON THE MACHINE FROM TIME TO TIME TO REDUCE
VIBRATIONS TO ELIMINATE RELATIVE MOVEMENT BETWEEN THE VARIOUS COMPONENTS.
The machine's reduction unit is lubricated with semi-fluid type synthetic grease suited for the lubrication of enclosed gears in casings.
When changing the grease, use only products with the characteristics listed below:
NLGI Degree: 0
Dropping point: °C 175
Thickening agent: LITHIUM SOAP
IN ORDER TO REPLACE THE LUBRICATING GREASE, CONTACT YOUR RETAILER.
DISPOSAL
In the event of scrapping the entire machine, it must be disposed of in accordance with the methods laid down by current
legislation.
Machine Frame
Electric Motor
Handle
R.A.E.E. IT08020000002803
The European Directive 2012/19/EU arranges that in the event of scrapping of electrical equipment, they must not be
disposed of city solid refusals but collected separately, in order to optimize the level of recovery and recycling of the
materials and above all in order to prevent damages to health and environment. To comply with European Directive
2012/19/EU, all electrical equipments must be marked with crossed basket symbol. The packing of the machine will be
disposed of in accordance with the methods laid down by current legislation. For further information concerning disposal of
electrical equipment, please refer to public administration service.
TROUBLESHOOTING
HAVE YOUR TOOL REPAIRED BY A QUALIFIED PERSON
This electric tool complies with the relevant safety rules. Repairs should only be carried out by qualified persons using original
spare parts, otherwise this may result in considerable danger to the user. Malfunctions not related to a conformity defect that
exists at the time of purchase are excluded from the warranty. Exclusions include:
• Wear of materials (taking into account the average life of the product)
• Failure to comply with the recommendations contained in this manual.
• Maintenance and tampering carried out by unauthorized personnel.
• Use of non-original spare parts.

EC DECLARATION OF CONFORMITY

BATTIPAV SRL (Z.I." Via Cavatorta 6/1-48033 Cotignola (RA) ITALY tel. 054540696 - info@battipav.com - www.battipav.com)
hereby declares under its sole responsibility that the LINDA-MASTERLINDA product:
Series: LINDA-MASTERLINDA
Art: TAB 1
Model: The MASTERLINDA single-brush machines are technologically advanced, high-performance machines used in the building
industry for cleaning, surfacing, sleeking and washing floors. It is a work done by the rotation of the surface with a diameter of 500 mm.
This Declaration relates to the following Directives:
2006/42/EC (MD), 2014/35/EU (LVD), 2014/30/EU (EMC), 2011/65/EU (RoHS II)
Reference to harmonized standards: EN60335-1:2012+A11:2014, EN ISO 12100:2010
Date of manufacture - Series N.
Polyamide Steel Aluminum Copper
Director General
Claudio Tondini
GB
Polyethylene
25