C-Wh5 User Interface (Ui) And Its Functions - Optika H Serie Manual De Instrucciones

12. C-WH5 User Interface (UI) and Its Functions

The C-WH5 UI shown in Fig. 13 includes a Camera Control Panel on the left side of the video window, a Mea-
surement Toolbar on the upper side of the video window, a Camera Control Toolbar on the bottom of the video
window.
Notes:
1. When users move mouse cursor to the left side of the video window, the Camera Control Panel will pop up
automatically.
2. When user moves mouse cursor to the bottom of the video window, the Camera Control Toolbar will pop
up automatically.
3. Move the mouse cursor to the upper side of the video window: a Measurement Toolbar will pop up for the
calibration and measurement operations. When user left-clicks the Float/Fixed button
ment Toolbar, the Measurement Toolbar will be fixed. In this case the Camera Control Panel will not pop up
automatically even if users move mouse cursor to left side of the video windows. Only when user left-clicks
the button on the Measurement Toolbar to exit from measuring procedure will they be able to do other
operations on the Camera Control Panel, or Synthesis Camera Control Toolbar.
During the measuring process, when a specific measuring object is selected an Object Location & Attribu-
tes Control Bar
Figure 13 - Camera Control User Interface
will appear for changing location and properties of the selected objects.
Page 23
on the Measure-