Hdmi Mode - Optika H Serie Manual De Instrucciones

5.2.2 HDMI Mode

1. Plug the HDMI cable into the HDMI port ① to connect the C-HP camera to HDMI display;
2. Plug a USB mouse into USB Mouse port ② to get control of the camera by using built-in software ProView;
3. Plug 12V/1A power adapter into DC 12V slot ⑤ to supply power for the camera. The LED Indicator ⑦ will
turn into red;
4. Insert SD card into SD Card slot ④ for saving captured images and recorded videos;
5. Press ON/OFF Button ⑥ to turn on the camera. The LED indicator will turn into blue;
6. Move mouse cursor to the left side of the video window, a Camera Control Panel will appear. It includes
Manual/ Automatic Exposure, White Balance, Sharpness and other functions, please refer to 6.1 for details;
7. Move mouse cursor to the bottom of the video window and a Camera Control Toolbar will appear. Operations
like Zoom In, Zoom Out, Flip, Freeze, Cross Line, Comparison and etc. can be achieved. Please refer to 6.2
for details;
8. Move mouse cursor to the upper side of the video window, a Measurement Toolbar with calibration and other
measurement tools will appear, please refer to 6.3 for details. The measurement data can be output with
*.CSV format.
Page 6