Transport And Handling; Guarantee; Introduction; Instructions, Restrictions And Other Uses Of The Appliance - grandimpianti ELECTRONIC S80 Instrucciones Para La Instalación Y Para El Uso

GB
INSTRUCTIONS FOR INSTALLATION AND USE
FOREWORD
Thank you for having chosen this ironer. If you
follow the present instructions carefully you
will certainly be satisfied with its performance
and guarantee.
In the event of claims or comments, the reference
text is the one written in the manufacturer's
native language, i.e. in Italian.

1. GUARANTEE

- The guarantee has a validity of twelve (12)
months from the date of purchase of the
appliance or of any integral part of it.
- The guarantee covers the replacement of any
part that is found faulty owing to manufacturing
causes. It is applied directly by the dealer.
- Labour costs are always to be met by the
purchaser. So are freight and packing costs,
and transport risks.
- The guarantee is contingent on the return of
damaged parts, which must be sent CARRIAGE
PAID, along with all the relevant information
on the appliance: model, serial number and
fault of the machine the damaged part was
assembled into.
- The guarantee does not apply to machines that
have been misused or have undergone improper
electrical connection, wrong or inappropriate
installation, noncompliance with of the
instructions for assembly and use or tampering
by unauthorised persons. The guarantee is void
when the serial number has been scratched,
removed or altered in any way.
- The guarantee does not apply to the following
items: parts which are subject to ordinary wear
like electric components, motor, coils,
contactors, heaters and so on.

2. INTRODUCTION

The present booklet has been drawn up in a
simple and rational way, in order for the reader
to become familiar with the appliance. Please,
read this manual carefully and keep it with the
machine. The warning and advice contained in
this manual may not cover every possible
contingency. This is why it is important to
point out that common sense, care and caution
cannot be supplied with the machine, but must
be contributed by those in charge of its
installation, maintenance and use. Whoever
operates the machine must read this manual
beforehand. Should the appliance need
repairing, the manufacturer recommends the
use of original spare parts (as for spare part
orders, see paragraphs 8.4 and 10).
The descriptions and sketches given in this
manual do not bind the manufacturer, who
reserves the right to duly update them and/or
include any upgrading modification of parts
and fittings as deemed necessary for
manufacturing or commercial purposes, at
any time and without previous notice.
3. INSTRUCTIONS, RESTRICTIONS
AND OTHER USES
During use as well as cleaning and
maintenance procedures, it is absolutely
necessary to make sure that the moving parts
of the appliance (motor, chain, etc.) are not
reached by tools or hands. The manufacturer
declines all responsibility for personal injury
occurring during use, cleaning or maintenance
procedures.
When using any electric or electronic
appliance, it is most necessary to comply
with certain basic rules. In particular: do not
touch the machine with damp or wet hands or
feet; do not use it while barefoot; do not
expose the appliance to the elements (rain,
salt, salinity, etc.); do not allow children or
unqualified people to use the appliance
without proper supervision; do not iron fabrics
that are not heat-resistant, applying high
temperature; do not iron laundry thicker than
5 mm or unsuitable for this type of ironer, or
clothes containing humidity which exceeds
the recommended limit. Do not smoke near
the machine or during machine use. Do not
disable or ignore safety devices. Do not leave
objects on the hot parts of the appliance, not
even after switching it off, because the press
basin needs a long time to cool. Do not clean
the machine using direct or indirect water
jets, and therefore, install it far from areas
where water jets are used.
Apply ironing sprays far from the appliance,
as they could build up dirt and spots.
ANY USE NOT
MENTIONED HERE BELOW MUST BE
CONSIDERED AS HAZARDOUS. THE
MANUFACTURER
WHATEVER RESPONSIBILITY FOR
DAMAGE DUE TO IMPROPER,
WRONG OR UNREASONABLE USE.
INSTRUCTIONS FOR THE
INSTALLER
4. UNPACKING, HANDLING AND
STORING THE MACHINE

4.1 TRANSPORT AND HANDLING

To transport and/or handle the appliance,
carefully follow these directions:
9
When carrying the appliance into a
building, use the supplied pallet or a similar
platform; use a manual or electric forklift
truck that has the required hoisting capacity
and is suitable for handling such appliances
(see technical data). Check that the ironer
can surmount any existing obstacle (e.g.
staircases, doors, etc.). Never drag the
appliance by a side or any other part.
When shipping the ironer, use only its
original packing material to ensure
sufficient stability during transportation.
4.2 STORAGE
Should the appliance be stored for a long
period before being installed, keep it in its
original package, as this guarantees
excellent protection. Check that the ambient
conditions correspond to those mentioned
in paragraph 5.3. If the ironer must stay out
of service for a long period after use, make
sure it is disconnected from the electrical
mains and cover it with its original plastic
protection bag.
4.3 UNPACKING
1) Prior to accepting the ironer from the
carrier, check that the package does not
show any damage. If it does, the machine
too may have undergone damage. In this
case, unpack the machine in the presence
of the carrier and sign the receipt with
reservation. The manufacturer assumes no
liability for any damage due to transport or
wrong storage.
2) Unpack the appliance with the utmost
care to avoid damage. Unscrew the
transport pallet from inside the right and
left side panels and then remove it.
3) Make sure that the instruction booklet is
not left in the package and lost.
Packing materials (plastic bags,
polystyrene, wood, cardboard, nails, etc.)
EXPLICITLY represent a safety hazard and consequently
must not be left within the reach of children.
Keep them for further transportation or
DISCLAIMS long-term storage (see paragraph 4.2).
Before connecting the appliance, check
that the data on the rating plate correspond
to those of the existing power supply mains.
The ironer must be used only for the purpose
it was explicitly designed for. The rating
plate is located on the left side, behind the
electrical board.
5. SETTING UP THE APPLIANCE
5.1 POSITIONING REQUIREMENTS
These ironers need no particular positioning
requirement but a flat floor. Being front-
service type, they may even be placed