Publicidad
Two Cable Layout Tips
A1.
Locate bus connection (HPT and FP only) and cable as
shown. Cut end of cable at angle to aid in piercing grom-
met. Leave additional cable for expansion loop.
A2.
Insert two cables into expediter.
Three Cable Layout Tips
B1.
Locate bus connection (HPT and FP only) and cable as
shown. Cut end of cable at angle to aid in piercing grom-
met. Leave additional cable for expansion loop.
B2.
Insert three cables into expediter.
B3.
Mount expediter with three cables.
Do not band over cable.
Wiring Details
C1.
Power Connection (1 to 3 Heating Cables)
C2.
In-Line Splice and T-Splice
C3.
End Termination (1 to 2 Heating Cables)
Remove jumpers for 2 cable terminations.
4
Publicidad
