Setting/Reviewing/Changing The On/ Off Events - Grundfos Digital timer kit Instrucciones De Instalación Y Operación

2. Central
1. North
Fig. 2 Zone selections
North
Central
South
Fig. 3 Zones map
11. Press [TIME] to access
the "AM" sunrise time
screen.
12. Press [+] or [-] to adjust
(± 2 hours) the sunrise
operating time to match
your local sunrise time.
NOTE: Press [RESUME]
to return to the original
sunrise time.
13. Press [TIME] to access
the "PM" sunset time
screen.
14. Press [+] or [-] to adjust
(± 2 hours) the sunset
operating time to match
your local sunset time.
NOTE: Press [RESUME]
to return to the original
sunset time.
15. Press [TIME] to return to
the time (main) screen.
5.2 Setting/reviewing/changing the ON/
3. South
1. Press [PROGRAM] to access the ON/OFF
2. To set your timer the first time, go to step 4.
3. To review existing ON/OFF settings,
"nor"
"CEN"
"SOU"
4. If dashes are displayed, press [TIME] to
5. Press [+] or [-] to select the (flashing) day(s)
6. Press [TIME] to make the hour digits flash.
7. Press [+] or [-] to scroll to one of the 2
8. Press [PROGRAM] to accept the sunrise/
9. Press [+] or [-] to scroll to the desired starting
10. Press [TIME] to make the minute digits flash.
11. Press [+] or [-] to scroll to the desired starting
12. Press [PROGRAM] to advance to the next
13. Repeat steps 4 through 13 until all desired
14. Repeat step 3 to check all your settings and
OFF events
event screens.
You will be setting ON event # 1.
repeatedly press [PROGRAM] to see up to
seven ON/OFF event pairs. Dashes mean
the displayed event is not set. To delete an
unwanted event press [RESUME]. To
change an event, go to step 4. To exit the
event setting mode, press [MODE] once or
press [PROGRAM] repeatedly until the event
number disappears or wait 30 seconds for
the timer to automatically return to the main
screen.
change the dashes to an event with flashing
day(s). Note that the events are numbered
"1" through "7", "ON" or OFF".
on which the displayed event must run:
– One day only:
Select "MO" or "TU" or "WE" ... or "SU",
etc.
– Every day:
Select "MO TU WE TH FR SA SU"
– Weekdays only:
Select "MO TU WE TH FR"
– Weekend only:
Select "SA SU"
To set this event to occur at a specific time of
day, skip to step 9. To set this event to
happen at sunrise or sunset, proceed to step
7.
screens with moon and sun icons flashing
and "AM" or "PM" flashing. The "AM" plus
icons screen means this event will happen at
sunrise. The "PM" plus icons means this
event will happen at sunset.
sunset setting and advance to the next event
screen. To add more events, go back to step
4. If all desired events have been set, go to
step 14.
hour for the event.
minute for the event.
event screen.
ON/OFF events have been set.
exit the event setting mode.
7