Audio Adjustments
Adjusting the time alignment
By adjusting the distance between each
speaker and a selected listening position, you
can insert delay times into the speaker output to
obtain a correct sound image and overall level
balance. Although this is automatically
achieved when you set the listening position,
the time alignment feature provides a fine
adjustment.
1 Press AUDIO and hold until SP Set
appears in the display, then press AUDIO to
select Time A.
After SP Set is displayed, press AUDIO until
Time A appears in the display.
• You cannot select Time A when neither F/L
nor F/R is selected in Posi.
2 Press 2 or 3 to select the speaker to be
adjusted.
Each press of 2 or 3 selects the speaker in the
following order:
Front speaker left—Center speaker—Front
speaker right—Rear speaker right—Rear
speaker left—Subwoofer
• You cannot select speakers whose size is set
OFF.
3 Press 5 or ∞ to adjust the distance
between the selected speaker and the listen-
ing position.
Each press of 5 or ∞ increases or decreases
the distance.
• 500.0cm — 0.0cm is displayed as the dis-
tance is increased or decreased.
4 Press BAND/ESC to return to the playback
display.
Using the equalizer
The parametric equalizer lets you adjust the
equalization to match car interior acoustic char-
acteristics as desired.
Recalling equalizer curves
There are seven stored equalizer curves which
you can easily recall at any time. Here is a list of
the equalizer curves:
Display
SUPER BASS
POWERFUL
NATURAL
VOCAL
FLAT
CUSTOM1, 2
• CUSTOM1 and CUSTOM2 are adjusted
equalizer curves that you can create for your-
self.
• When FLAT is selected no supplement or
correction is made to the sound. This is useful
to check the effect of the equalizer curves by
switching alternatively between FLAT and a set
equalizer curve.
Press EQ to select the equalizer.
Press EQ repeatedly to switch between the
following equalizer.
POWERFUL—NATURAL—VOCAL—
FLAT—CUSTOM1—CUSTOM2—SUPER
BASS
Section
Equalizer curve
Super bass
Powerful
Natural
Vocal
Flat
Custom1, 2
En
02
13