Using Balance Adjustment; Adjusting Source Levels - Pioneer DEQ-P7000 Manual De Operación

Section
Audio Adjustments
02
Note
• When you make adjustments for listening
position, the speakers are automatically set
for appropriate output levels. You can tailor
them if you want as discussed under the
heading of Adjusting the speaker output levels
using a test tone or Adjusting the speaker
output levels.

Using balance adjustment

You can select a fader/balance setting that pro-
vides an ideal listening environment in all occu-
pied seats.
1 Press AUDIO to select Fad.
Press AUDIO until Fad appears in the display.
• If the balance setting has been previously
adjusted, Bal will be displayed.
2 Press 5 or ∞ to adjust front/rear speaker
balance.
Each press of 5 or ∞ moves the front/rear
speaker balance to the front or the rear.
• Fad F25 – Fad R25 is displayed as the
front/rear speaker balance moves from front to
rear.
• Fad F/R 0 is the proper setting when only two
speakers are used.
3 Press 2 or 3 to adjust left/right speaker
balance.
When you press 2 or 3, Bal L/R 0 is displayed.
Each press of 2 or 3 moves the left/right
speaker balance to the left or the right.
• Bal L25 – Bal R25 is displayed as the
left/right speaker balance moves from left to
right.
8
En

Adjusting source levels

SLA (source level adjustment) lets you adjust
the volume level of each source to prevent radi-
cal changes in volume when switching between
sources.
• Settings are based on the FM tuner volume
level, which remains unchanged.
1 Compare the FM tuner volume level with
the level of the source you want to adjust.
2 Press AUDIO to select SLA.
Press AUDIO until SLA appears in the display.
3 Press 5 or ∞ to adjust the source volume.
Each press of 5 or ∞ increases or decreases
the source volume.
• SLA +4 – SLA –4 is displayed as the source
volume is increased or decreased.
Notes
• Since the FM tuner volume is the control, it is
not possible to apply source level adjustments
to the FM tuner.
• The MW/LW tuner volume level can also be
adjusted with source level adjustments.
• Video CD and CD are set to the same volume
adjustment setting automatically.
• External unit 1 and external unit 2 are set to
the same volume adjustment setting automat-
ically.