Initial Settings; Correcting Distorted Sound - Pioneer DEQ-P7000 Manual De Operación

Section

Initial Settings

03

Correcting distorted sound

You can minimize distortion likely caused by the
equalizer curve settings.
• Setting an equalizer level high can cause
distortion. If high sound crippled or distorted,
try switching to Low. Normally, leave the setting
at High to ensure quality sound.
1 Press SOURCE and hold until this unit
turns off.
2 Press FUNCTION and hold until a function
name appears in the display.
3 Press FUNCTION to select D.ATT.
Press FUNCTION until D.ATT appears in the
display.
4 Press 2 or 3 to select Low or High.
Pressing 2 or 3 switches between Low (low)
and High (high) and that status is displayed.
• To cancel initial settings, press BAND/ESC.
• You can also cancel initial settings by holding
down FUNCTION until the unit turns off.
15
En