English; Intended Use; Safety Precautions - Snom M215 SC Bundle Manual Del Usuario

ENGLISH

Important Information
The M215 SC bundle contains one M200 SC base station with power adapter and Ethernet cable and one M15 SC handset,
a rechargeable battery pack, and one handset charger with nondetachable power adapter.
Setting up, configuring, and using base station and handset
For information on setting up, configuring, and using the base station and the handset, please refer to the user's manuals
listed on the M-series product pages at www.snom.com.

Intended Use

The handset M15SC is designed for use with the M200SC base station. The M200SC base station is designed for use with
the M15SC handset. Any other use is considered unintended use. Any modification or reconstruction not described in the
user manual is considered unintended use.

Safety precautions

Please read these precautions and the instructions on how to set up and use the phone thoroughly before using the phone.
Save this guide and do not give the phone to third parties without it.
Charger, power supply/adapter, rechargeable batteries
Use only the power converter (AC/DC adapter) delivered with the base or a power supply expressly recommended by
Snom. Other power power supplies may damage or even destroy the device.
Use only the rechargable batteries delivered with the handset or expressly recommended by Snom. In case of malfunction,
contact your dealer or Snom-authorized service personnel.
• Power of M15 SC handset charger:
◦ EU: Ten Pao, model number S004LV0600030
◦ UK: Ten Pao, model number S004LB0600030
• Power of M200 SC base station:
◦ Power over Ethernet (PoE): IEEE 802.3af, Class 2.
◦ If PoE is not available, order the separately available power adapter (not included in delivery):
- EU: Snom A6, Phihong model number PSM10R-050 (PN 00004325); UK clip available separately
- EU: Ten Pao, model number S004LV0500080 (PN 00004373) or Chou Sen, model number CS6F050080FG
- UK: Ten Pao, model number S004LB0500080 (PN 00004374) or Chou Sen, model number CS6F050080FB
Placement of base, handset charger, cables, and cordsPlacement of base, handset
charger, cables, and cords
• Warning: Power adaptors shall be installed near the equipment and shall be easily accessible.
• Avoid placing the devices' cords where people may trip over them. Avoid placing the cords where they may be exposed
to mechanical pressure as this may damage it. If the power supply cord or the plug is damaged, disconnect the device
and contact qualified service personnel.
• Charger, power adapter, and cord are for indoor installation only. Not for outdoor installation!
• The operational temperature for base station and handset is between -5°C and + 45°C (23°F and 113°F), humidity 95%
non.-condensing. The charging temperature for the handset is between +5°C and +40°C (41°F and 104°F).
• Do not install product in rooms with high humidity (for example, in bathrooms, laundry rooms, damp basements). Do not
immerse product in water and do not spill or pour liquids of any kind onto or into any parts of it.
• Do not install product in surroundings at risk for explosions and do not use the handset in such surroundings (paint
shops, for example). Do not use the phone if you smell gas or other potentially explosive fumes!
• Install the base at a minimum distance of 100 cm (39") to persons and animals.
• Medical devices might be adversely affected. Please consider the technical ramifications when installing the devices in
a doctor's office, for example.
• Warning: The handset contains a magnet, and its earpiece may attract small dangerous objects such as needles or
en
5