Premium PCH796DR Manual Del Usuario página 6

INSTALLATION FOR MODEL PCH760R,PCH762DR,PCH794DR,PCH796DR,
PCH767DR,PCH797DR
Step 1:
Please put the cooker hood on the wall and
mark the position where you want to install.
We recommend the height from the hob to
10mm
the lower edge of the hood should be from
650mm to 700mm.
Expanding Tube
5x60
Wood Screw
232mm
Hook A B
Expanding Tube
A B
Back of the hood
5x60
Wood Screw
Step 3:
Exhaust pipe
Take out the cooker hood from the carton
and put it on a horizontal work table gently.
Air outlet
Fix the reducerpipe into the air outlet of the
inner duct, and then fix the exhaust pipe into
the top of reducer,make sure it is connected
to the reducer tightly.
Step 4:
Bracket
Matching the bracket to the holes of the
inner duct and fix it well with M4
screws.
Inner duct
M4 Screw
Step 2:
According the space between the hole
A&B,drill 2 holes in level on the wall with
8mm in diameter and 60-70mm in depth.
Press the 2 expanding tube provided into
the holes. Tighten the 2 wood screws of
5x60mm which supplied together with the
hood to the expanding tube.Make sure it is
fixed enough and cannot be move.Hang the
cooker hood on the 2 wood screws,make
sure it is to be level and stable.
4
12