Install The Hardware - Archos CESAR MPM Manual Del Usuario

2. Install the Hardware

NOTE: DO NOT try to open the lid of the CESAR until the drive is
fully installed into a computer. The lid may be locked and
CANNOT be opened at this stage.
NOTE : First use require 4 hours of Batteries charging.
•
Plug in the power cable into the
Power Socket at the back of your
CESAR.
•
Plug the
anelectrical outlet.
•
Verify that the green "ON" LED is turn
ON.
AC/DC adpter
•
into
After 4 hours of batteries charging,
connect the interface cable to the
connector at the back of the
CESAR drive.
- 6 -