Usb Interface Installation; Usb 2.0 Interface Installation - Archos CESAR MPM Manual Del Usuario

B. USB Interface Installation
NOTE : using USB ports repeated on some peripherals
(such as keyboards).
May cause quick discharge.
Windows 98SE - Windows ME & Windows 2000 :
•
Turn on your system and wait for Windows to finish booting.
•
Insert the driver floppy disk into the floppy disk Drive
•
Insert USB cable to an open USB port on your computer.
Follow steps listed below to complete installation:
•
A "New Hardware Found" window will guide you through
installation of driver. When prompted for driver disk, Check
"Floppy disk drives" box, and uncheck all other boxes. Insert
Install Disk in floppy drive then click Next.
C. USB 2.0 Interface Installation
NOTE : using USB ports repeated on some peripherals
(such as keyboards).
May cause quick discharge.
Windows 98SE :
•
Turn on your computer and wait until it has finished booting.
•
Connect USB end of USB cable to a free USB port on your
computer
•
A "New Hardware Found" window will guide you through
installation of driver. When prompted for driver disk, Check
"Floppy disk drives" box, and uncheck all ot
- 8 -