Intended Use; Test Principle - ForaCare D20 No-Coding Manual Del Usuario

Intended Use

This system is a 2 in 1 system designed to measure blood glucose
outside the human body (in vitro diagnostic use) and to measure
blood pressure non-invasively. It is intended for use at home as an aid
to monitoring the effectiveness of diabetes control.
It shall not be used for the diagnosis of diabetes and hypertension, or
for the testing of neonates. It is intended to be used by a single person
and should not be shared.

Test Principle

Your system measures the amount of sugar (glucose) in whole blood.
The glucose testing is based on the measurement of electrical current
generated by the reaction of glucose with the reagent of the strip. Your
monitor measures the current, calculates the blood glucose level, and
displays the result. The strength of the current produced by the reac-
tion depends on the amount of glucose in the blood sample.
The blood pressure is measured non-invasively at the arm based on
the Oscillometric method.
This device is NOT able to take measurements in the presence of
common arrhythmia, such as arterial or ventricular premature beats or
arterial fibrillation. It may produce reading errors.
7