1- Connections; 2- Keyboard - JMA CTM-700 Manual De Instrucciones

1
Connections
Volt metre
connector
Normal/Upgrade operation switch
• Volt metre connector:
To connect the cable with the battery
pressure testing probes.
• Power supply connector:
To connect the general external power
supply 220V/ 9Vc provided with the CTM
700 machine.
• General ON-OFF Switch:
Used to switch the machine on and off.
• PC-USB Connection:
The machine can be connected to a PC
for external support and upgrades.
• Normal-Upgrade Function Switch:
With the machine switched off, select the
functioning mode by putting the selector
in the desired position.
If the machine is switched on and the
switch is in the Normal position, it will
function as a copier.
If the machine is switched on with the
switch in the Upgrade position, it will
show the upgrade menu.
Until the machine is restarted and the
switch changed to the Normal position,
only the upgrade function will work.
• Emitter program Cable:
To connect the different emitter pro-
gram cables.
There are two cables, one to copy the
evolutionary emitters and the other for
the rest.
12
General ON-OFF switch
Power connector
Emitter program cable
USB PC Connection
2
Keyboard
• Hexadecimal keys:
The numbers appear as soon as the keys
are pressed.
To type the letters 'A' to 'F', simulta-
neously press the shift key and the letter
key.
Example: To write the letter 'C' activate
• Up/Down keys:
Are used to access the different menu
options
• Accept key Enter Ok:
Press this key to confirm the action you
have made.
• Escape Key
Cancels the last selection or menu viewed
in the screen.
• Delete Key:
Erases the last character typed on the
screen.