Automatic Code; Language; 4- Actualizaciones - JMA CTM-700 Manual De Instrucciones

Once the power is adjusted, the frequency
can be verified at 433 MHz and later the
original, final control can be saved.

Automatic code

3.8
This option allows us to quickly read com-
plex fixed codes. However, this option does
not have any frame analysis, so it will not
show on the screen whether to process
a binary, trinary, multifrequency or other
code. It does not show the switch configura-
tion either. This option reads the frame and
shows whether it has read correctly or not.
If it has, the code can be copied using the
"COPY TRANSMITTER" option.
3.9

Language

With this option, select the language for the
menu functions.
To access the languages option, switch on
the machine with the two arrow keys pres-
sed simultaneously. A menu will be displa-
yed requesting the language number. The
following language options are available:
1. Castellano (Spanish)
2. Inglés (English)
3. Francés (French)
4. Italiano (Italian)
4
Upgrades
The upgrades to improve the capacity of the
CTM 700 machine are made remotely.
To check for upgrades, connect to a PC with
USB connection and connect to the Internet.
The "CTM 700: Upgrade" program must also
be installed.
Once all of the above have been checked,
continue with the following steps:
1. Connect the CTM 700 to a PC with
Internet connection using the USB cable
provided with the machine.
2. Supply power to the CTM 700 with the
function switch selecting the "upgrade"
position.
3. Execute the CTM 700 upgrade program
on the PC.
4. Follow the instructions on the upgrade
program.
Once the upgrade process has finished, the
machine will switch off and back on again in
"normal" mode. When the machine restarts,
the new upgrade version will be displayed
on the screen and it is ready to operate with
the normal copying process.
Following are some screenshots of the
machines upgrade software.
User registration screen
17 17