CBX WOYA Manual Del Usuario página 11

Car Seat installations
Install car seat adapter
13
Slide adapter into slot on the inside of hinge. Repeat for the other side.
Please note that releasing button of adapter should be on the front side.
Install car seat
14
Close canopy. Adjust backrest to the lowest position. Put car seat into adapters until it clicks in.
Note: Baby in the car seat should face parent during pushing.
15
Do not install the car seat forward facing. Keep sure to attach the bumberbar to the stroller when
using the car seat.
Lift car seat to check if it is installed properly and locked.
16
Take off car seat
17
Press down releasing button on left adapter (forward facing), then press down releasing button on
right side, lift car seat at the same time to take it off stroller.
Important — Keep these instructions for future reference.
Compatible with SHIMA for WOYA
Warnings, safety instructions, maintenance, disposal and guarantee can be found in the warnings
booklet.
INSTRUCTIONS
EN
11