Assembly/Disassembly Instructions; Disassembly Of Lamps - Arneg Malaga H160 ventilated Guía De Instalación Y Manejo

M a l a g a
E n g l i s h
Frost or ice in the cabinet
• fans do not work
in the evaporator
• heaters broken
• Sdef probe detached
• air currents that alter the circu-
lation of refrigerated air
i
in all cases not described or where it is not possible to solve the problem by following these
directions call the nearest support centre

25. Assembly/disassembly instructions

DANGER! Live parts. Electrocution.
REMOVE THE ELECTRIC POWER SUPPLY BEFORE ANY OPERATION!
Observe chapters 1-2-3-4-5
Protect hands with work gloves

25. 1 Disassembly of lamps

Procedure
1. remove the -a- screw
2. remove bulb holder assembly -b-
3 . remove the screw -c-
4 . remove the -d-cap
5. remove the -e-lamp
Replace the lamp
To install, follow the reverse procedure.
4 2
• check electrical connections
• check the ventilation inside the store
d
c
e
b
a
05060172 00 11-07-2017