3
READ AND SAVE THESE INSTRUCTIONS
2
1
0
WARNING: To avoid fire, shock, and serious personal injury, follow all instructions
carefully.
1. Read your Owner's Manual carefully before installing the receiver. Retain Owner's
Manual for future reference.
2. Be careful of the fan and blades when installing the receiver in the ceiling cover. Before
installing or servicing the ceiling fan or receiver, switch power off at service panel and
lock service panel to prevent power from being switched on accidentally. If the service
panel cannot be locked, securely fasten a warning device, such as a tag, to the service
panel.
ADDITIONAL SAFETY INSTRUCTIONS FOR INSTALLATION
1. To avoid possible electrical shock, be sure electricity is turned off at the main fuse or
circuit breaker box before wiring.
2. Make certain no bare wires are exposed outside the wire connectors.
3. All wiring must conform to National and Local Electrical Codes.
4. Follow the recommended instructions for the proper method of wiring your new
receiver. If you feel you do not have enough electrical wiring knowledge or experience,
have your receiver installed by a licensed electrician. Any electrical work not described
in this manual should be performed by a licensed electrician.
5. For indoor use only. Do NOT install in damp locations.
Questions, problems, missing parts: Before returning to the store call
Emerson Electric Customer Service - 8 a.m. - 6 p.m., Eastern, Monday-Friday
Part No. F40BP75240000
Revision: 170217
RCBT100
Bluetooth
with App Owner's Manual
• 3-Speed Hand Held Transmitter
• Single Light
• Supplied with Receiver
• Includes Light Dimming Selection Switch
WARNING
!
Safety Instructions
1-800-654-3545
www.emersonfans.com
Model Number
Ceiling Fan Control
®
• Spanish - page 9
• French - page 17
Form No. BP7524
U.L. Model No: MR101F