Assembly Steps - Schwinn Fitness 460 Instrucciones Para El Montaje

Step 1: Rear Stabilizer
Parts
• #1 - Main Assembly (Qty 1)
• #2 - Rear Stabilizer (Qty 1)
Hardware
• #24 - M8 x 20 Button Head Bolt (Qty 2)
• #27 - M8 Spring Lock Washer (Qty 2)
• #28 - M8 Flat Washer (Qty 2)
Tools
• 6mm Hex Key
24
27
28
Assembly
Note: This step requires two people.
1-1 Have one person lift the rear of the Main Assembly.
1-2 Move the Rear Stabilizer under the Main Assembly
with the handle facing out and the bolt holes up.
1-3 Align the bolt holes.
1-4 Attach the Rear Stabilizer to the Main Assembly with
the hardware shown.
1-5 Tighten hardware.
2
Figure 1
4
Assembly Manual
1