Hkoenig NV60 Manual De Utilización página 14

5. Re-install the safety cap onto the machine body and
tighten it in position.
AFTER THE MACHINE IS USED
1. After the cleaning machine is used, unplug the power cord and disconnect the power
supply.
2. Press down the steam button to release the pressure until no steam is injected out.
3. Slowly unscrew the safety cap but do not remove it, and residual steam will be discharged
slowly until no steam cornes out. Then place the machine in a cool place to cool it down for
about five minutes. Finally, completely remove the safety cap.
4. Empty the residual water in the tank and clean the external surface with a piece of dry
cloth.
5. At last, re-install the safety cap onto the machine body and tighten it in position.
Notes: Re-install the safety cap onto the machine body and tighten it in position.
ENVIRONMENT
CAUTION:
Do not dispose of this product as it has with other household products. There is a separation of this
waste product into communities, you will need to inform your local authorities about the places where
you can return this product. In fact, electrical and electronic products contain hazardous substances
that have harmful effects on the environment or human health and should be recycled. The symbol
here indicates that electrical and electronic equipment should be chosen carefully, a wheeled waste container
is marked with a cross.
Adeva SAS / H.Koenig Europe - 8 rue Marc Seguin - 77290 Mitry Mory - France
www.hkoenig.com - sav@hkoenig.com - contact@hkoenig.com - Tél: +33 1 64 67 00 05