Cleaning And Maintenance - Hkoenig STW26 Manual De Utilización

MEMORY
If the power supply has been broken off or unplug the power cord
unintentionally during operation, the appliance will be continued previous
operation automatically from the point when the disconnection occurred
provided that the pause does not exceed 10s, even without pressing any
button. In the event the pause time exceeds 10, the display shows the default
setting, the appliance must be re-started.

CLEANING AND MAINTENANCE

CAUTION: Be sure to unplug this appliance before
cleaning. To protect against electrical shock, do not
immerse cord, plug or unit in water or liquid. After each
use, always make sure plug is first removed from wall
outlet.
1) Clean all detachable parts after each use in hot,
sudsy water.
2) Wipe the product's exterior surface with a soft,
damp cloth to remove stains.
3) Water droplets may buildup in the area above the
funnel and drip onto the product base during brewing.
To control the dripping, wipe off the area with a clean,
dry cloth after each use of the product.
4) Use a damp cloth to gently wipe the keeping warm
plate. Never use abrasive cleaner to clean it.
5) Replace all parts and keep for next use.
REMOVING MINERAL DEPOSITS
To keep your coffee maker operating efficiently, you should clean away the
mineral deposits left by the water regularly according to the water quality in
your area and the frequency use the appliance, the detail is as follows:
1. Fill the water tank with water and descale to the maximum level in the gauge
of coffee maker (the scale of water and descale is 4:1, the detail refers to the
instruction of descale. Please use "household descale", you can use the citric
acid instead of the descale (the one hundred parts of water and three parts of
citric acid).