Display; View; Status; Production Log - Danfoss TripleLynx Manual Del Usario

2. Display

2.1. Display
The integrated display on the inverter front gives the user access to all information about the PV
system and the inverter.
The display has two modes:
Normal
Power saving
Overview of display buttons and functionality:
The contrast level of the display can be altered by pressing the arrow up/down button while hold-
ing down the F1 button.
The menu structure is divided into four main sections:

View

Status

Production Log

Setup

See the following sections for more detailed information.
The display is in use
After 10 min. of no display activity the back light of the display turns off to save power.
Re-activate the display by pressing any key
Presents a short list of information. No changes can be made
Shows inverter parameter readings. No changes can be made
Shows logged production data. No changes can be made
Shows configurable parameters
L00410310-03
F1 View Screen
F2 Status Menu
F3 Production Log Menu
F4 Setup Menu
* When an F- key is selected the LED above it will
light up.
Home Return to View Screen
OK Enter/select
Arrow up A step up/increase value
Arrow Down A step down/decrease value
Arrow Right Moves cursor right
Arrow Left Moves cursor left
Back Return/de-select
On - Green LED On/flashing = On grid/Connect-
ing
Alarm - Red Flashing = Fail safe
LED
2. Display
2
5