ANSMANN POWERLINE 4.2 PRO Manual De Instrucciones página 14

1. MODE button
Press "MODE" within 8 seconds after inserting 1-4 rechargeable batteries in order to
select from the following charge programs:
a. CHARGE 
Rechargeable battery charging. After complete charging there is an automatic
changeover to pulse maintenance charging (also with the following charge programs).
b. DISCHARGE
Rechargeable battery is first discharged and then charged in order to minimise the
memory effect.
c. REFRESH
("DISCHARGE REFRESH" or "CHARGE REFRESH" is displayed in the LCD display) 
Rechargeable battery will be discharged and charged multiple times to revitalise it. In
order to return a rechargeable battery to its maximum capacity, it will be repeatedly
discharged and charged (max. 10 times) until no more capacity increase can be
detected.
d. TEST
("CHARGE TEST" or "DISCHARGE TEST" is displayed in the LCD display)  Rechargeable
battery will first be charged and then discharged to measure the capacity in mAh/Ah
and then charged again.
2. CURRENT button
Press the "CURRENT" within 8 seconds of selecting the charge program or after inserting
the last rechargeable battery in order to select the charge current for the "CHARGE" or
"TEST" program or the discharge current for the "DISCHARGE" or "REFRESH" program.
3. DISPLAY button
Press the "DISPLAY" button during charging or discharging to display the charge/
discharge current (in mA), the rechargeable battery voltage (in V), the charge/discharge
capacity (in mAh or Ah) or the elapsed charge/discharge time (in hh:mm).
After you have carried out your changes via the function buttons, the charger starts
with the selected parameters automatically after 8 seconds insofar as there are no
further selections made.
Note: If you want to select the same mode for several rechargeable batteries, first
English
Deutsch | | Français | Italiano | Español
14
Svenska | Português | Nederlands | Russian