EN
Warnings:
Do not put fi ngers into the bowl during op-
eration.
•
After use, turn the appliance off by turning the selector (12) to "0" and
disconnect the plug from mains outlet.
In case of large amount of food to be processed, insert adequate
breaks between an operating cycle and the next one. Each mixing
process must not exceed 10 minutes.
Attention!
Do not insert the fi ngers into the bowl be-
fore the attachment stops.
•
Rotate the lever (11) clockwise of 1/4 of a turn and raise the arm (6).
•
Remove the attachment inserted into the drive shaft by pressing it up-
wards and rotating it clockwise (Fig. G).
•
Remove the bowl (4) by rotating it counter-clockwise.
•
Clean the parts according to instructions in paragraph "Cleaning".
4. Use
28