Grouw 18121 Manual De Instrucciones página 38

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 66
Charging
Press the lock button on the battery (10) and
remove the battery from the machine.
Insert the battery into the charger so that
it clicks into place. The battery can only be
inserted one way.
Insert the plug from the charger (11) into the
mains socket.
The red indicator light on the charger will
come on while the battery is charging. One
charge takes approx. one hour.
Once the red indicator light on the charger
goes out and the green indicator light comes
on, the battery is fully charged.
Unplug the charger. Press the lock button on
the battery down and pull the battery out of
the charger.
38
Checking the battery charging
status
The battery is equipped with a test button
and a charge status indicator with 3 LEDs.
Press the test button and read off the battery
charge status from the lit LEDs:
Green, orange, red
Orange, red
Red
Use
Make sure that all the teeth on the blade (2)
are always lubricated.
The blade is designed for a branch thickness
of max. 15 mm. Therefore, cut all branches
thicker than 15 mm in the work area with
pruning shears or lopping clippers before
using the trimmer.
Attach the battery to the hedge trimmer so
that it engages with an audible click.
High capacity
Medium capacity
Low capacity,
recharge the
battery

Publicidad

Tabla de contenido
loading

Tabla de contenido