Settings; Useful Information About The Baby Monitor - Beurer babycare BY 33 Instrucciones Para El Uso

Operation with mains part
Using the mains part plug, connect the parent unit incl. battery to a socket.
The device automatically switches on. The power LED will light up green.
If the mains part plug is unplugged the device will switch to battery operati-
on. The standby time will depend on the battery charge status.
To switch the device off press the
LED will go out.
If there is no connection between the devices (baby unit not
switched on or out of range), an acoustic warning will sound on the
parent unit.

7. Settings

Adjusting the volume
You can adjust the volume in 5 levels on the parent unit by pressing the
or button.
The sound intensity is also pictured using an LED noise level light
display so that the device can also be used by those with a hearing
impairment.

8. Useful information about the baby monitor

• Battery operation of the baby monitor minimizes electrosmog from electri-
cal and magnetic alternating fields.
• You can increase the range of the baby monitor by positioning the baby unit
as high up as possible near a door or window and ensuring that the batter-
ies are not too weak.
• Other radio waves may interfere with the transmission of the baby monitor.
Therefore, do not position the baby monitor near devices such as micro-
waves, WLAN, etc.
button for approx. 2 seconds, the power
22