Troubleshooting - Monster Power PRO 3500 Manual Del Propietário

Symtom.
The PowerCenter
is not receiving power.
All manuals and user guides at all-guides.com

TROUBLESHOOTING

Possible Cause
The PowerCenter is not
turned On.
Too many devices drawing
too much power are
connected, causing an
overload, throwing the
Thermal Circuit Breaker.
Remedy
• Turn the PowerCenter switch on.
• Make sure the PowerCenter's AC power plug
is plugged into a properly grounded
120 volts (nominal) wall outlet.
• In some cases, a wall switch may need to be
thrown to make the wall plug come alive. Try
turning on the light switched located near the
wall unit powering the PowerCenter.
• Press the PowerCenter Thermal Circuit Breaker
button in to reset. Please allow 10 minutes
before attempting to reset. If you reset too
soon, the breaker may prematurely sense
power overload and not allow unit to operate.
11