Publicidad
CONTROLLER PROGRAMMING INSTRUCTIONS (cont)
VI.
how to set Temperature:
If temperatures are not displayed, press ENTER key. The
top line displays the Process Value or the current tempera-
ture inside the oven. The bottom line displays the Set
Value or the desired temperature setting. To change the
Set Value, press the UP or DOWN keys until the desired
temperature is displayed and press ENTER.
Security Features:
The controller has two built-in security locks to prevent
unauthorized personnel from modifying parameter
settings.
The LoC1 setting affects all parameters of the controller. If
LoCo2 setting is enabled, the operater will have to unlock
the controller to make any changes to the controller param-
eters.
The LoC2 setting affects all parameters with the
tion of the set point. If LoC2 setting is enabled, the only
parameter that the operator will be able to change is the
set point. In order to change any other parameters, the
operator will have to unlock the control before making a
change.
In order to unlock the control, the operator must depress
the ENTER and INDEX key simultaneously.
To access the Lock control setting, press the INDEX key
twice from the main temperature display.
I.
OPERATING INSTRUCTIONS
Description of Controls
The controller in this oven is a full-indicating, PID (propor-
tional, integral, derivative) controller using a Type J ther-
mocouple sensor. The controller is factory set for optimum
performance accuracy with a maximum load at maximum
temperature.
Operation
Turn on power to the oven. Set temperature controller to
desired temperature by pressing the UP/DOWN keys and
then pressing enter.
excep-
N5610400-15
Publicidad
