Before The First Usage; Properties; Control Panel - Silvercrest SBB 850 A1 Instrucciones De Uso

Before the first usage

Disposal of the packaging material
Unpack your appliance and dispose of the packaging
material in accordance with your local regulations.
Initial cleaning
Wipe the baking mould ¶, kneading paddles ²
and outer surfaces of the bread baking machine
with a clean, damp cloth before putting it into opera-
tion. Do not use abrasive scrubbers or cleaning
powders. Remove the protective foil on the control
panel .
Pre-heating:
Please take note of the following notice
regarding the first usage:
For the first heating up ONLY, place the empty baking
mould into the appliance. Close the appliance
lid . Select the programme 12, as described in
the section "PROGRAMMES" then press the button
Start/Stop , to warm up the appliance for 5 mi-
nutes. To terminate the programme, after 5 minutes
press the button Start/Stop
tone is heard.
As the heating elements are lightly greased, a slight
smell may occur when first putting the appliance
into operation. This is harmless and stops after a
short time. Provide for sufficient ventilation, for
example, open a window.
Allow the appliance to cool down completely and
once again wipe the baking mould
paddles and the outer surfaces of the Bread
Baking Machine with a clean moist cloth.
Risk of fire! Do not allow the Bread Baking
Machine to warm up for more than 5 minutes
with an empty baking mould
real danger of overheating.
until a long signal
, kneading
. There is a
- 72 -

Properties

With this Bread Baking Machine you have the pos-
sibility to bake bread according to your taste.
• You can choose from 12 different baking
programmes.
• You can employ ready-to-use baking mixtures.
• You can knead dough for buns and noodles
and also prepare marmalades and jams.
• With the programme "Gluten Free" you can
bake gluten-free baking mixtures and recipes
with gluten-free flours, such as cornflour,
buckwheat flour and potato starch.

Control panel