Ironing Without Steam; Vertical Steam Ironing; Variable Steam (Specific Types Only) - Philips GC6400 Serie Manual Del Usario

EnGlISh
10
- Select steam setting l for temperature setting 2.
- Select a steam setting between l and ; for temperature settings 3 to MAX.
5 The steam tank and the soleplate heat up.
- Cold start: the soleplate takes approximately 2 minutes to heat up and the steam tank takes
approximately 6 minutes to heat up.
- Quick reheat: if you refill the steam tank during the ironing process, the water in the steam
tank takes approximately 6 minutes to heat up.
When the iron has reached the set temperature, the temperature light goes out.
,
As soon as the water in the steam tank is ready for steam ironing:
,
- GC6450/GC6440: the 'steam ready' light goes on (Fig. 12).
Note: During steam ironing, the 'steam ready' light goes out from time to time. This indicates that the
steam tank is heating up to the right temperature.
- GC6433/GC6430/GC6420/GC6410: the power-on light in the on/off switch goes out.
6 Press the steam trigger and keep it pressed while you steam iron (Fig. 9).
Note: If you have not used the steam function for some time, the steam that was still present in the
supply hose has condensed into water. When you start steam ironing again, this may cause some
spluttering in the appliance and a few droplets of water may escape from the soleplate.
Note: To prevent droplets from falling onto your garments, hold the iron over an old cloth and press the
steam activator until the steam production has normalised before you start steam ironing again.

Ironing without steam

1 Set the required ironing temperature (see chapter 'Preparing for use').
 Iron without pressing the steam trigger.
Some steam escapes if you press the steam trigger by accident while you iron.
,
If the steam tank is empty or has not heated up yet, you hear a clicking sound inside the
,
steam tank. This happens when the steam valve opens and is perfectly harmless.
Features

vertical steam ironing

You can also steam iron when you hold the iron in vertical position. This is useful for removing
creases from hanging clothes (e.g. jackets, suits and coats), curtains etc.
1 Hold the iron in vertical position and press the steam trigger (Fig. 1).
Never direct the steam at people.

Variable steam (specific types only)

The steam control is continuously adjustable and can be set to any position between l and ;
(see chapter 'Preparing for use').
'Steam tank empty' light (specific types only)
When the water in the steam tank runs out during use, the 'steam tank empty' light goes on.
1 Refill the steam tank with water (see chapter 'Preparing for use - Fast refill').
'Steam ready' light (specific types only)
When the steam tank is ready for steam ironing, the 'steam ready' light goes on.