Technical Data - Kerbl Premium 22665 Instrucciones De Uso

• If battery pack does not charge properly:
- Check for voltage at outlet by plugging in some other electrical device.
- Check to see if outlet is connected to a light switch which turns power „off" when lights are turned off.
- Check battery pack terminals for dirt. Clean with cotton swab and alcohol if necessary.
- If you still do not get a proper charging, take or send tool, battery pack, and charger to a Station for repair.
2.7. SPEED
• Your Cordless Rotary Tool is equipped with a variable speed control dial. To turn the tool ON, rotate dial to desired number to select the opera-
ting speed needed from 5.000 - 35.000 RPM. To turn tool OFF, rotate dial to the „0" OFF position.
Switching Setting
0
2
4
6
8
10

3. Technical Data:

3.1. Batterie LI-ION (H):
Input
No Load Speed R.P.M.
Collet Capacity
3.2. Charger (G):
Input
Amperage Rating
Charging Time
Electronic scrap
Disposing of this device after its service life is the responsibility of the operator.
Please consult the valid national regulations. The device must not be disposed of in household waste.
In accordance with the stipulations of the EU Directive on the Disposal of Electrical and Electronic Devices, the device can be
disposed of free of charge at the local waste collection or recycling centre. Alternatively, it can be returned to retailers who offer
a collection service.
The proper disposal helps to ensure environmental protection and prevents any adverse effects on human health and the
environment.
Speed Range
OFF
5.000 - 11.000 rpm
12.000 - 20.000 rpm
21.000 - 25.000 rpm
26.000 - 30.000 rpm
31.000 - 35.000 rpm
10,8 V / 1,0 Ah / 125 W
5000 - 35000
0,8 - 3,2 mm
230 - 240 V, 50/60 Hz
375 mA
3 hr.
10