Safety Instructions; Battery / Charger Safety - Kerbl Premium 22665 Instrucciones De Uso

Safety and Operating Instructions
EN

1. Safety Instructions

1.1. In General
It is only possible to work safely with this device by reading the corresponding operating and safety instructions in their entirety and following
them to the letter.
Application
The warranty issued by the manufacturer and any liability claims against the manufacturer shall be rendered null and void if the device is used in
a manner not in accordance with its designated use or if alterations are made to it. Check that the voltage given on the nameplate is the same as
your source at the mains.
Check all components before use
Have any damaged parts repaired by a specialist or the manufacturer. Incorrectly performed repairs represent a risk of accidents to the user.
Always use original spare parts for any repairs.
Restrict unauthorised access
Make sure that no-one, in particular children, can get near the tooth grinder without your permission.
Keep your workplace tidy
An untidy workplace increases the danger of accident.
Protect connection cables
Do not use the connection cable to pull out the plug or as a means of carrying the device. Make sure that connection cables are not exposed to
heat and do not come into contact with oil or sharp edges. Damaged connection cables represent a potential cause of fire, short-circuits and
electric shocks.
Take the ambient conditions into account
Protect your device against all liquids and moisture. Otherwise there will be an increased risk of fire or electric shocks.
Look after your device
Always keep your product in a safe, dry place out of the reach of children. Pay attention to any maintenance requirements. Check your device at
regular intervals. Always use original accessories and spare parts.
National and international regulations
Comply with national and international regulations governing health and safety at work.
Dress properly
Do not wear loose clothing or jewelry; they can be caught in moving parts. Rubber gloves and non-skid footwear are recommended when
working outdoors. Wear protective hair covering to contain long hair.
Use safety glasses
Also use face or dust mask, if cutting operation is dusty.
Outdoor use extension cords
When tool is used outdoors, use only extension cords intended for use outdoors and so marked.
1.2. Cordless Tool Safety
• A battery operated tool with a separate battery pack must be recharged only with the specified charger for the battery.
• Use battery operated tool only with the specifically designated battery pack. Use of any other batteries may create a risk of fire.
• Avoid accidental starting. Be sure switch is in the off position before inserting the battery pack.
• Disconnect battery pack from tool or place the switch in the off position before making any adjustments, changing accessories, or storing the
tool.
• When the battery pack is not in use, keep it away from other metal objects like: paper clips, coins, keys, nails, screws, or other small metal
objects that can make a connection from one terminal to another.
• Always hold the tool firmly in your hands during the start-up.

1.3. Battery / Charger Safety

• Use only the charger which accompanied your product or direct replacement as listed in the catalog or this manual.
• Do not disassemble charger or operate the charger if it has received a sharp blow, been dropped or otherwise damaged in any way.
• Do not recharge battery in damp or wet environment. Do not expose charger to rain or snow. If battery case is cracked or otherwise damaged,
do not insert into charger.
8