Daewoo International DTC-700 Manual De Instrucciones página 14

2.2.1) If you entered the wrong number and press Info key, LCD displays "_" again
to ask for the right number. If there are 3 fails consecutively, the phone will return
back to on-hook state.
2.2.2) If you entered into any of the number 11822, 11818, or 11825 which are
regarded as right numbers, for example 11825, LCD displays "11825_", then press
Info key, the new number of 11825 was recorded.
b. Dial the recorded information number
1. At on-hook or off -hook state, press Info key.
2. The recorded information number is dialled out.
Function of Programmable Direct Call M1-M4
a. Store
1. At on-hook state, press Set key, LCD displays "_".
2. Input the direct call number you want to store not exceeding 32 digits.
3. Press one of the four direct call keys M1-M4.
b. Dial
At on-hook or off -hook state, press one of the four direct call keys M1-M4, the stored
number will be dialled out.
AUTO-TURN ON SPEAKERPHONE REMOTELY

Authorize incoming numbers
1. At on-hook state, press Set key, LCD displays "_".
2. Input the fi rst authorized number not exceeding 32 digits.
3. Press Mem key and the number key 1.
4. Total 5 numbers can be authorized, use the same way to authorize the second,
third, fourth and fi fth numbers to the number key 2~5.

Auto-turn on speakerphone by authorized incoming numbers
When the telephone is receiving an incoming call, it will compare the incoming
number with the list of authorized numbers. If the incoming number matches with
one of the fi ve authorized numbers, then the telephone automatically turns on
speakerphone to answer the call.
FUNCTION TELECOM NETWORK ANSWERING MACHINE

Activate the telecom network answering machine
1. At on-hook or off -hook state, press Mem and Info keys.
2. The number "*10#" is dialled out and displayed on LCD.
3. Hang up the handset or press
machine is Info.
ENG
key to hang up, now the network answering
14