Connecting The Audiophile 192; Monitor Mixer Page - M-Audio AUDIOPHILE 192 Guia De Inicio Rapido

Connecting the Audiophile 192

The Audiophile 192 offers following connections:
< Main Inputs 1 and 2 – Connect the line outputs of analog devices like mic
preamps or keyboards into these.
< S/PDIF Input – Connect digital devices that have an S/PDIF output here.
< Main Outputs 1 and 2 – These should be connected to the analog inputs of
a 2-track recorder or can be used to connect to an alternate pair of powered
speakers.
< Monitor Outputs 1 and 2 – Connect these to your powered monitors. The output
source of these outputs is the monitor mixer.
< S/PDIF Output – Connect this to digital devices that have an S/PDIF input.
< MIDI I/O – Connect these to your MIDI keyboards and sound modules.

Monitor Mixer Page

The Monitor Mixer page has fader controls for the input sources feeding the Audiophile
192's software Monitor Mixer. The output of the Monitor Mixer appears at the analog
Monitor Outputs.
Note that the Main Outputs' overall output level is affected by the S/W RET 1/2 (WavOut
1/2) level faders.
WavOut 1/2*
These faders control the volume level of the main audio stream output, assigned from
your DAW software in the monitor mixer, and the overall output of the Analog Hardware
Outs 1 and 2.
*NOTE: on the Mac this is labeled SW Out 1/2.
6