Snapper SXDCS82 Manual Del Propietário página 19

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

OPERATION
PROPER CUTTinG STanCE
Balance your weight with both feet on solid ground.
Keep left arm with elbow locked in a "straight arm" position to withstand any kickback force.
Keep your body to the left of the chain line.
Keep your thumb on underside of front handle.
BaSiC OPERaTinG/CUTTinG PROCEDURES
Practice cutting a few small logs using the following technique to get the "feel" of using the saw
before you begin a major sawing operation.
Take the proper stance in front of the wood.
Press the safety lock and squeeze the trigger switch then release the safety lock and let the
chain accelerate to full speed before entering the cut.
Begin cutting with the saw against the log.
Keep the unit running the entire time you are cutting, maintain a steady speed.
Allow the chain to cut for you; exert only light downward pressure. forcing the cut could result
in damage to the bar, chain, or motor.
Release the trigger switch as soon as the cut is completed, allowing the chain to stop. If you
run the saw without a cutting load, unnecessary wear can occur to the chain, bar, and unit.
Do not put pressure on the saw at the end of the cut.
THUMB ON
UNDERSIDE OF
HANDLE BAR
Chain Line
19
Straight Arm

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

1696773

Tabla de contenido