Maintenance; General Maintenance - Snapper SXDCS82 Manual Del Propietário

MAINTENANCE

GEnERaL MainTEnanCE

Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from
various types of commercial solvents and may be damaged by their use. Use clean cloths to
remove dirt, dust, lubricant, grease, etc., firmly to maintain control.
LUBRiCaTiOn
All of the bearings in this product are lubricated with a sufficient amount of high grade lubricant
for the life of the unit under normal operating conditions. Therefore, no further lubrication is
required.
REPLaCinG ThE GUiDE BaR anD Chain
D a n G E R
Never start the motor before installing the guide bar, chain, chain cover, and chain cover lock nuts.
Without all these parts in place, the clutch can fly off or explode, exposing the user to possible
serious injury.
w a R n i n G
To avoid serious personal injury, read and understand all the safety instructions in this section.
w a R n i n G
Before performing any maintenance, make sure the battery is removed. failure to heed this
warning could result in serious personal injury.
C a U T i O n
Always wear gloves when handling the bar and chain; these components are sharp and may
contain burrs.
28