Door Reversal - Russell Hobbs RHTTFZ1-EU Manual De Instrucciones

Door Reversal

You will need to tilt the freezer backward to access the lower hinge which holds
screws. Do not tilt more than 45 degrees and do not lay the freezer flat on its side.
Reversing the door:
1. Remove the top plastic hinge cover and set aside
2. Unscrew the two screws from the metal bracket and set aside.
3. Remove the three plastic inserts on the opposite side of the freezer and door.
Now fix the top door bracket to this side using the screws that was previously
removed. Replace the plastic hinge cover.
9