Diamatic 08013A, 08014A Libro De Instrucciones página 62

Your new BLASTRAC commercial fl oor burnisher is warranted to be free from defects in workmanship
under normal use and service when operated and maintained in accordance with maintenance and opera-
tion instructions expressed in the Operator's Manual for the BLASTRAC. The warranty period is from the
date of purchase, and is subject to the conditions below.
2 YEARS FOR PARTS AND SERVICE LABOR (See exceptions below)
This warranty is extended only to the original purchaser for the use of the product. The BLASTRAC will
be repaired or replaced, at the manufacturer's option, if any part is proven to be defective in material or
workmanship. Parts repaired or replaced under this warranty are warranted only during the balance of the
warranty period. 110 volt electric starters are warranted for a period of ninety (90) days only. This warranty
does not cover normal wear parts such as electrical cables, rubber parts, and engine maintenance parts
such as fi lters or spark plugs. This warranty cover the engine components related to the LP fuel system.
All other engine components are covered by the engine manufacturer. This warranty does not cover paint
or appearance items, misuse, neglect, or failure to maintain as recommended by the manufacturer. The
company disclaims any responsibility for loss of time, transportation commercial loss or other incidental
or consequential damages.
The battery will be warranted by the BLASTRAC manufacturer for a period of 6 months from the machine
date of purchase. The defective battery must be returned. Returned batteries that are only in need of
recharging will not be warranted.
In California, the emission control system is warranted to the original owner and each subsequent owner
for a period of two (2) years from the date of delivery to the original owner.
STATED WARRANTIES ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED
The manufacturer's liability under this warranty is limited to repair of the product and/or replacement of
parts and is given to purchaser in lieu of all other remedies, including INCIDENTAL AND CONSEQUEN-
TIAL DAMAGES.
THERE ARE NO EXPRESSED WARRANTIES OTHER THAN THOSE SPECIFIED HEREIN. THERE
ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION OF THE FACE HEREOF. NO
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, WARRANTY OF MERCHANTABILITY, SHALL BE
IMPLIED.
A warranty registration card is provided with your BLASTRAC. Return the card to assist in providing the
performance you expect from your new Concrete Polisher.
If diffi culty develops with your BLASTRAC burnisher, you should:
a) Contact the nearest authorized BLASTRAC repair location. Repair locations can be provided by
the facility where you purchased your BLASTRAC burnisher. Only these locations are authorized
to make repairs to the product under this warranty.
b) Transportation and/or freight charges to and from the repair location must be prepaid by the pur-
chaser.
- 62 - FORM NO. 71511A
BLASTRAC
Concrete Polisher
Limited U.S. Warranty
BATTERY WARRANTY
EMISSION CONTROL SYSTEM
BLASTRAC Operator's Manual - Concrete Polisher