How to use your Braun Forehead thermometer
First time use
Insert 2 AAA batteries (see "Replacing the batteries" for instructions).
Remove 98.6 °F label from display.
1
Remove cap
2
Power on
Press and release the power button once.
Backlight will come on and the warm up
sequence starts.
3
Ready
When the device displays three dashed lines ---
it is ready to take a temperature.
4
Position
Position the thermometer in the center of the forehead, just
above and between the eyebrows. Be sure to hold the
thermometer flush against the forehead. It is important to
hold the thermometer and the forehead steady during
measurement. Movement will impact the temperature
reading.
If the forehead area is covered with hair, sweat, or dirt, please
remove the hair or clean the area, and then wait 10 minutes before taking a temperature
measurement. In addition, the thermometer should be in the same ambient
temperature as the individual for 10 minutes before taking a temperature measurement.
NOTE: ALWAYS remove the protective cap before taking a temperature reading.
7