Brother 885-X01 Manual De Instrucciones página 26

APPENDIX — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Symptom, Cause/solution
You have not wound the bobbin
thread properly.
You have not threaded the right
combination of thread and needle for
the fabric you are using.
You have not attached the presser
foot holder properly.
• Attach the presser foot holder
properly.
The thread tension is incorrect.
You have not used a bobbin that has
been designed for this machine.
Bobbin is set incorrectly.
The fabric is wrinkled.
You have not threaded the upper
thread properly or fitted the bobbin
properly.
You have not fitted the spool
properly.
You have not used the right
combination of fabric, thread and
needle.
The needle is bent or blunt.
If thin fabrics are being sewn, the
fabric is not being fed correctly.
The presser foot you are using is not
appropriate for the type of stitch that
you want to sew.
• Attach the presser foot that is
correct for the type of stitch that
you want to sew.
The thread tension is incorrect.
Stitches are skipped.
You have not threaded the upper
thread properly.
You have not used the right
combination of fabric, thread and
needle.
The needle is bent or blunt.
The needle is incorrectly installed.
Dust has accumulated under the
needle plate or in the bobbin case.
The stitch is not sewn correctly.
The presser foot that you are using is
not correct for the type of stitch.
• Attach the presser foot that is
correct for the type of stitch that
you want to sew.
The thread tension is incorrect.
25
Reference Symptom, Cause/solution
The thread is tangled.
10
• Remove the tangled thread. If the
thread is tangled in the bobbin
case, clean the bobbin case.
16
The fabric does not feed.
The darning plate is fitted on the
needle plate.
–
• Remove the darning plate.
You have not used the right
19 combination of fabric, thread and
needle.
10
The thread is tangled, for example, in
the race.
12
• Remove the tangle thread. If the
thread is tangled in the race, clean
the race.
The presser foot you are using is not
10-15
appropriate for the type of stitch that
you want to sew.
• Attach the presser foot that is
correct for the type of stitch that
14
you want to sew.
16
7
18
–
19
13
16
7
7
22
–
19
Reference
22
–
16
22
–